User Guide

PC2 Made Easy
70
The wet/dry parameters obviously respond to all 128 possible values, For FX Routing,
which has only four possible values, the PC2 responds to controller #94 as follows:
¥ Values of 0-31 select no effect
¥ Values of 32-63 select FX-A
¥ Values of 64-95 select FX-B
¥ Values of 96-127 select Both FX-A and FX-B
4. Unlike some other types of modules, you canÕt save a multi-timbral configuration in
the PC2. There is only a single global setting of these parameters. Each channel will stay
on its current settings until you either change it from the front panel or send MIDI
program change and/or controller messages. This also means that if you go to MIDI
Setups Mode, any channels used by a Setup you select will be changed to the settings
found in that Setup, and the next time you go to MIDI Receive mode, you will see those
changes reflected in the display. For this reason, it is a good idea when sequencing to put
as much of this controller info into your tracks, to assure you have your settings the way
you want for each song.
We will cover more details on using effects when sequencing in tutorial #30.