User Guide

PC2 Made Easy

5. Press the >> button to get to the Feedback parameter. Try choosing different amounts

to hear the change the in the sound. You can choose both positive and negative amounts.

Once you have an amount you like, you might want to go back to the Wet/Dry button

and bring the wet/dry amount back down to make the effect more subtle.

6. Once you have created the effect you want, you can save it. As we mentioned at the

beginning of the tutorial, you can save the effects for preset programs as well as for user

created programs. This allows you to customize the effects for the presets without

having to use one of the User slots just for effects changes.

Press the Store button. The PC2 asks if you want to Store Effects for that program. If

you answer Yes, then Program 17 will now always have this new effect you have

created. (If you donÕt want to do this, just press No to Exit out of the dialog, then press

Internal Voices twice to exit out of the editor.)

7. One other parameter that you should be aware of is Stored FX. Press FX Mode, then

the >> button twice. (You must either store the effect you were editing or press the

Internal Voices button twice to exit out of the editor without saving before you can go to

the FX Mode button.)

Stored FX can be set to User or Factory. It is normally set to User. If you have

customized effects for a number of the presets and want to get everything back to

Factory defaults, you can set this parameter to Factory. Your customized effects still

remain in memory, and you can choose them again by setting the parameter back to

User.