User Guide

PC2 Made Easy
19
Once you have the name the way you want it, press Enter.
8. The PC2 now jumps back to the Store dialog. The display will read ÒSave Setup
129?Ó. You can save to any number you want, by scrolling with the wheel or + and Ð
buttons. If a Setup already exists at a numbered location, the display will change from
ÒSaveÓ to ÒReplaceÓ.
Now press Enter. Congratulations - you have created and stored your first Setup!
A programming note: As mentioned above Setup 128 starts with all 4 zones assigned to
MIDI channels, and with zones 2-4 muted. This means that if you press a zone button
once or twice (depending on whether that zone was already in the display), it will
unmute and begin playing. If you have created a 2 zone setup and would like to prevent
accidentally playing zones 3 or 4 if you pressed their zone buttons, you can turn those
zones off. To do this, press the MIDI Transmit button, then press the zone button for the
zone you want to turn off. Next press 0, then Enter.