User Guide

PC2 Made Easy
13
C. If you are editing a Program, Lyr will change to Cmp. The Compare button will also
blink. You will hear the previously stored version. Press Compare again to return to your
currently edited version.
Details on using the Copy function can be found at the end of this document, after all
the tutorials.
Editing Shortcuts
Following are few tricks to speed up editing of various parameters:
Setting Note Values:
For any parameter whose value is a note, hold Enter and strike the note on the keyboard
that you want and the parameter will switch to that note.
Turning a parameter Off or setting it to None:
Typing 0 and pressing Enter will change most parameters to a value of Off or None.
To quickly edit a specific controller:
Each physical controller (sliders, wheels, etc.) has a number of parameters, and there are
17 different physical controllers. All of those parameters are under the same menu, so
that is a lot of parameters to scroll through!! If you hold the Controllers button and move
a specific controller, the PC2 will jump to the first parameter for that controller. For
example, hold Controllers and move Slider A. The display jumps to Slider A Ctrl Num.
Pressing the << and >> buttons simultaneously will jump to the same parameter for the
next controller in the list. After following the previous example, press both those buttons
and you jump to Slider B Ctrl Num.
Jumping to a specific channel in the MIDI Receive menu:
Holding MIDI Receive and pressing one of the 16 Sound Select buttons will jump to that
numbered MIDI channel.
Switching Banks when calling up a Program (in Internal Voices mode or in the Program
Menu when editing a Setup):
Type the bank number, then the Ò+/-Ó button, then the program number, then press
Enter.
Using the Copy Function