User's Manual

Beat Type

1. Holding down [SHIFT] button, and then press [FUNCTION+]/

[FUNCTION-] button to select beat type menu. LCD displays “xxx

BeatType”.

Use [+/YES]/ [-/NO] or data dial to change beat type. The range of

beat type: 0, 2~9.

2. Press [+/YES] and [-/NO] simultaneously to set the beat type value

to its default setting: 004.

Metronome Volume

1. Holding down [SHIFT] button, and then press [FUNCTION+]/

[FUNCTION-] button to select Metronome volume menu. LCD displays

“xxx MetroVol”.

Use [+/YES]/ [-/NO] or data dial to change the volume over the range

of 0~127.

2. Press [+/YES] and [-/NO] simultaneously to set the volume value to its

default setting: 080.

Pedal Type

1. Holding down [SHIFT] button, and then press [FUNCTION+]/

[FUNCTION-] button to select pedal type menu. LCD displays “00x

Pedal xxxx”.

Use [+/YES]/ [-/NO] or data dial to change pedal type. 3 types of pedal

functions are available: Soft pedal(Soft), accompaniment start/stop

Pedal(St/T), memory switch pedal(Mem).

2. Press [+/YES] and [-/NO] simultaneously to set the pedal type to its

default setting: Soft.

Reverb Level

1. Holding down [SHIFT] button, and then press [FUNCTION+]/

[FUNCTION-] button to select reverb level menu. LCD displays “xxx

ReverbLev”.

Use [+/YES]/ [-/NO] or data dial to change reverb level. Range: 0~127.

2. Press [+/YES] and [-/NO] simultaneously to set the reverb level to its

default setting.

Note:

The default reverb level may be different for different voices.

Chorus Level

1. Holding down [SHIFT] button, and then press [FUNCTION+]/

[FUNCTION-] button to select chorus level menu. LCD displays “xxx

ChorusLev”.

Use [+/YES]/ [-/NO] or data dial to change chorus level. Range: 0~127.

2. Press [+/YES] and [-/NO] simultaneously to set the chorus level to its

default setting.

Note:

The default chorus level may be different for different voices.

Function Menu

CMY

MPG100_Manual_G03_161009.ai 24 2016/10/9 16:17:42MPG100_Manual_G03_161009.ai 24 2016/10/9 16:17:42