User's Manual

With the built in digital effects, you can add ambiance and depth to

your music in a variety of ways.

1. The DSP effect is set to ON by default. The chorus and reverb level

can be adjusted in the function menu.

2. Holding down [SHIFT] button, and then press the [DSP] button to

turn DSP effect on or off.

Note:

There may be a slight break or noise if you switch on/off the DSP when

style or song is playing. This is normal and need not panic.

Mixer function adjusts separately the volume of different tracks.

1. Holding down [SHIFT] button, and then press the [RHYTHM] button

to set the Rhythm track volume. LCD displays “Rhythm” and the

track volume.

2. When the LCD displays “Rhythm” , use the data dial or the

[+/YES]/[-/NO] button to adjust the value. Pressing [+/YES] and

[-/NO] button simultaneously will mute or restore the track volume.

3. Follow the steps above to adjust the other tracks.

Note:

In voice R1 setting, the [UPPER] button adjusts the main voice volume.

In voice R2 setting, the [UPPER] button adjusts the R2 voice volume.

DSP

Mixer

LCD Display Range

0 - 127

The option and parameters are as follows:

xxx Rhythm

xxx Bass

xxx Chord

xxx Phrase

xxx Lower

xxx Upper

CMY

MPG100_Manual_G03_161009.ai 21 2016/10/9 16:17:42MPG100_Manual_G03_161009.ai 21 2016/10/9 16:17:42