User Manual
The Rear Panel
Basic MIDI Port Hookup
GS-4
Basic MIDI Port Hookup
To use the Forte as a MIDI controller for another sound module, use a MIDI cable to connect
the MIDI port marked “OUT” to the MIDI input port of the module that you want to
control.
To control the Forte using another MIDI controller, use a MIDI cable to connect the MIDI
port marked “IN” to the MIDI output port of the controller that you will be using.
Using Forte MIDI Out
Using Forte MIDI In
For other MIDI connection scenarios, please refer to the Forte User Manual.
The Pedal Jacks
Use the ve pedal jacks to connect controller pedals to the Forte.
Although optional Kurzweil pedals are recommended, it is possible to use most switch or
controller pedals that adhere to the following specications.
Switch Pedals
1/4 inch tip-sleeve (mono) plug
Continuous Control
(CC) Pedals
10-kOhm linear-taper potentiometer, 1/4 inch tip-ring-sleeve
(stereo) plug with the wiper connected to the tip.