Specifications

Program Edit Mode
Program Pages
7-6
FX Page
Press the FX soft button to call up the FX page (Effects page). Use this page to apply audio
effects to a program. You can choose an effects chain for insert effects and an effects chain
for auxiliary effects 1 and 2.
The Forte’s chains contain a variety of effects including different types of reverb, chorus,
delay, anger, phaser, tremolo, panner, leslie, distortion, EQ, compression, lter, envelope
following lter, frequency stimulator, ring modulator, frequency offset, pitch LFO, and
stereoizer. The parameters and range of values for this page are summarized below.
Parameter Range Of Values Default Value
Insert Effect list (See Appendix F) 0 None
Aux 1 Effect list (See Appendix F) 0 None
Aux 1 Send 0 to 100% 0%
Aux 2 Effect list (See Appendix F) 0 None
Aux 2 Send 0 to 100% 0%
Aux 2 Send (Piano Programs) Off, -95dB to 24dB Off
Output Main, Sec Main
Pre/Post Ins Post, Pre Pre
Insert
Choose an effects Chain that will be applied to the current program. If you only need to use
one Chain at a time on one MIDI channel, Insert effects may be all you need. If you plan
to use multiple programs on different MIDI channels, it is best to use both Insert and Aux
effects (see Aux below). Aux effects have the advantage of being available to all programs on
each MIDI channel at the same time.