Specifications

Storage Mode
The LOAD page
11-8
Pressing LOAD
Press the LOAD button when you have the hardware containing your User Programs/Multis
plugged into the USB port.
If no USB connection is detected by Forte, you will see the error message “Error: No valid
device inserted.”.
Use the cursor buttons, -/+ buttons or the Alpha Wheel to browse the les in the currently
selected storage device.
After selecting the le to load, press the OK Soft Button.
You will now be presented with options for how the User Programs/Multis will be loaded
into the Forte. Selection is either FILL or OVWRTE.
OPEN
Selecting Open will open a selected folder.
PARENT
Selecting Parent will close an existing open folder.
FILL
Selecting FILL means you would like to keep the existing User
Programs or Multis. Forte will now load the User Programs/Multis into
the  rst empty ID slot it  nds, and then subsequent empty slots.
OVERWRITE
( OVWRTE)
Selecting OVWRTE  rst deletes all the existing User Programs or
Multis, and then loads the new User Programs or Multis into the  rst
user location at ID number 1024 onwards.
During the load process the screen will show information about the objects that are being
loaded. At the end, the screen will display a message indicating if the load process was
successful, or if there were errors.