Specifications

Global Mode
MIDI Page
10-14
Sysex ID
The SysEx ID parameter determines the ID number for the unit if you are using more than
one device with the same MIDI manufacturer ID number. You can set this parameter to any
number from 0 to 127.
Unless you have multiple Forte keyboards receiving Sysex messages from a single source,
you will not need to change the Sysex ID from the default setting of 0.
If you do have multiple Fortes receiving Sysex messages from a single source, make sure
each Forte has a different Sysex ID. This will allow you to direct Sysex messages to the
appropriate Forte by specifying which unit with the Sysex ID byte that’s included with every
Sysex message.
To have the unit respond to Sysex messages regardless of the Sysex ID, set Sysex ID to 127.