Specifications

Global Mode
MAIN1 Page
10-5
Audio Input
If you have an MP3 audio player plugged into the Forte’s rear “Audio In” jack, setting this to
On will allow audio to be heard. This signal will be mixed with sounds normally generated
by the Forte.
Clock Source
With the Clock Source parameter set to Internal, Forte plays using its own Tempo. If you
wish to sync the Forte to the tempo of an external device, use the External setting.
Out Pair B Mode
The B Audio Outputs can either be used as a second set of stereo (auxiliary) outputs by
setting this parameter to “Normal” or they can be used to mirror the main A Audio Outputs
by setting this parameter to “Mirror Primary Outputs”. By default this parameter is set to
Normal.
Audio Out S/M
The audio outputs are normally used as a stereo pair; however, on occasion the Forte might
be operated in Mono mode by plugging an audio jack into the Left A Audio Output. Setting
this parameter to Auto allows the Forte to detect the audio connections and adjust to mono
output if required. The parameter can be set to Stereo, to force the Forte to output a stereo
signal always and ignore the audio output detection. By default this parameter is set to Auto.
Multi Controllers
When a multi is selected, this parameter determines how the sliders respond to movement.
When set to instant, moving a slider will result in the assigned parameter immediately
jumping to the slider position. With some parameters an abrupt change to the sound may
be undesirable. In this case set this parameter to PassEntry and the slider will only become
active when the slider is moved past the Multi Entry Value. This results in smooth changes
to the sound.