Specifications

Multi Edit Mode
COMMON Page
9-27
COMMON Page
The COMMON page contains parameters that affect every zone in the current Multi.
Press the COMMON soft button to enter the COMMON page.
Parameter Range Of Values Default Value
Tempo 20 to 400 BPM 120
Aux FX Channel 1 to 16 1
KB3 Channel 1 to 16 1
Tempo
When Clock Source (see Global Mode MAIN1 page) is set to Internal, the Tempo parameter
sets the Forte’s system tempo for this Multi. The Tempo parameter values are in units of
BPM (beats per minute). This controls the tempo of any tempo based effects.
You can also set the tempo using the Tap Tempo button (located on the front panel above
the Pitch Bend Wheel.) Tap the Tap Tempo button on beat for a measure or two at the
desired tempo to set a tempo. This also brings up the Tap Tempo page (see Tap Tempo
Button on page 3-7).
Aux FX Channel
The Aux FX Channel determines the FX channel through which the aux sends of all of
the zones in the current Multi are sent. For example, if a zone 2 in a Multi has a program
with 25 Basic Delay 1/8 as an Aux FX, and zone 2 is assigned to channel 5, then setting the
Aux FX Channel to 5 sends the programs of all of the zones in the setup through zone 2’s
Program’s Aux FX (i.e., through 25 Basic Delay 1/8).