Specifications
Multi Edit Mode
FX Page
9-26
AUX1, AUX2
The setting for the AUX1 (Auxiliary 1) & AUX2 (Auxiliary 2) parameters determines if
the auxiliary send level for the selected Zone program is overridden, and if so, by what
value. The two Auxiliary effects busses are global to all zones/channels on the Forte. The
default value of [p] means “no override” (i.e., use the values specied in the program.) To
override the send level value, select the AUX1 or AUX 2 send level parameter for the desired
Zone, and enter a new value with the Alpha Wheel, -/+ buttons, or enter a value with
alphanumeric pad and press the Enter button.
AUX1 Override, AUX2 Override
These parameters switch on or off the Aux override. Set Override to Yes to select an
override Aux Chain on this page. Set Override to No to use the Aux FX chain of the
specied Aux FX Channel.
Normally, the Aux Effects Chains are specied by the program on the specied Aux Effects
channel. When Override is set to Yes, the Chain parameter appears, allowing you to choose a
different Aux effect.
Chain
When AUX1 Override or AUX2 Override is set to Yes, you can select an override Aux
Chain for the corresponding Aux Effect. This parameter is not visible when Override is set
to No. (See Appendix F Effects on page F-1 for a full list of available Effect Chains).