Specifications

Multi Edit Mode
FX Page
9-25
FX Page
The Forte contains Kurzweil’s acclaimed effects processor, and when combined with Multi
Mode it puts the power of an entire studio of audio effects at your ngertips. This section
contains everything you’ll need to know in order to use the Forte’s effects in Multi Mode.
Press the FX soft button to enter the FX page.
Parameter Range Of Values Default Value
Enable Y, N, (Y) Y
AUX1 [p], 0 to 127 [p]
AUX2 [p], 0 to 127 [p]
AUX1 Override Yes, No [p]
AUX2 Override Yes, No No
Chain Effects List (Appendix F) No
Enable
Use the Enable parameter to enable or disable the Insert effects Chain of the Program in
each Zone. Each Zone can be set to Y to enable Insert effects, or to N to disable Insert
effects. Use the Alpha Wheel or Value buttons to change between Y and N. Some Zones
set to Y may be displayed as (Y). This means that there are not enough effects resources
available for that Zone, and that Zone’s Insert effects are not loaded. If you want to use the
Insert effects Chain for a Zone displayed as (Y), try setting other Zones to N.