User Guide

FXAlg #960: 3 Band Enhancer
Algorithm Reference-161
PAGE 2
PAGE 3
In/Out When set to ÒInÓ the effect is active; when set to ÒOutÓ the effect is bypassed.
Out Gain The overall gain or amplitude at the output of the effect.
CrossOver1 Adjusts one of the -6dB crossover points at which the input signal will be divided into
the high, mid and low bands.
CrossOver2 Adjusts the other -6dB crossover points at which the input signal will be divided into the
high, mid and low bands.
Lo Enable, Mid Enable, Hi Enable Turns processing for each band on or off. Turning each of the 3 bands off
results in a dry output signal.
Lo Drive, Mid Drive, Hi Drive Adjusts the input into each transfer. Increasing the drive will increase the effects.
Lo Xfer, Mid Xfer1, Mid Xfer2, Hi Xfer1, Hi Xfer2 Adjusts the intensity of the transfer curves.
Lo Delay, Mid Delay, Hi Delay Adjusts the number of samples the each signal is delayed.
Lo Mix, Mid Mix, Hi Mix Adjusts the output gain of each band.
Lo Enable On or Off Mid Enable On or Off
Lo Drive Off, -79.0 to 24.0 dB Mid Drive Off, -79.0 to 24.0 dB
Lo Xfer -100 to 100% Mid Xfer1 -100 to 100%
Mid Xfer2 -100 to 100%
Lo Delay 0 to 1000 samp Mid Delay 0 to 500 samp
Lo Mix Off, -79.0 to 24.0 dB Mid Mix Off, -79.0 to 24.0 dB
Hi Enable On or Off
Hi Drive Off, -79.0 to 24.0 dB
Hi Xfer1 -100 to 100%
Hi Xfer2 -100 to 100%
Hi Delay 0 to 500 samp
Hi Mix Off, -79.0 to 24.0 dB