User Guide

Tube Amp/Distortion/Delay Combinations
Algorithm Reference-104
PAGE 3
PAGE 4 (Chorus algs)
PAGE 4 (Flange algs)
In/Out
Toggles the entire effect on or off. When off, the input signal is passed.
Input Bal Adjusts the ratio of left and right algorithm inputs to be summed into the monaural
signal that is processed by the effect. 0% blends equal amount of left and right. Negative
values blend increasing amounts of left, while positive values blend increasing amounts
of right.
Out Gain The overall gain or amplitude at the output of the effect.
Bass Tone, Mid Tone, Treb Tone Adjusts the 3 bands of the tone control integrated with the distortion drive circuit.
Flattest response is obtained by setting Mid Tone to 10.0, and both Bass Tone and Treb
Tone to 0.0.
Tube Drive, Poly Drive Adjusts the gain into each distortion circuit. Higher values produce more distortion.
Warmth Adjusts a 1-pole (6dB/oct) lopass Þlter applied after distortion.
Cab In/Out Turns the cabinet simulator on or off.
Cab Preset Selects the preset cabinet type.
Cab Pan Adjusts the output pan position of the cabinet simulator signal that is mixed at the
output of the algorithm. Note that when Ch Wet/Dry or Fl Wet/Dry is set to 100%, no
signal from the cabinet is mixed directly to the output, so this parameter has no affect.
MD Insert Selects where in the signal chain the moving delay is to be. PreDist places it before the
distortion and tone circuit. PostDist places it between the distortion circuit and cabinet
simulator, and Bypass takes it completely out of the path.
MD Wet/Dry Adjusts the ratio of the moving delay output mixed with its own input to be fed to the
next effect in the chain.
MD Insert Post Dist, ... MD Delay 0.0 to 1000.0 ms
MD Wet/Dry 0 to 100% MD LFOMode Flange, ...
MD LFORate 0.00 to 10.00 Hz
MD LFODpth 0.0 to 200.0%
MD Fdbk -100 to 100%
Ch Rate L 0.01 to 10.00 Hz Ch Rate R 0.01 to 10.00 Hz
Ch Depth L 0.0 to 100.0 cts Ch Depth R 0.0 to 100.0 cts
Ch Delay L 0 to 720 ms Ch Delay R 0 to 720 ms
Ch Fdbk L -100 to 100% Ch Fdbk R -100 to 100%
Ch PtchEnv Triangle or Trapzoid
ChWet/Dry 0 to 100% Ch Out Bal -100 to 100%
Fl Rate 0 to 32 bts Fl Tempo System; 1 to 255 BPM
Fl Xcurs L 0 to 230 ms Fl Xcurs R 0 to 230 ms
Fl Delay L 0 to 230 ms Fl Delay R 0 to 230 ms
Fl Fdbk L -100 to 100% Fl Fdbk R -100 to 100%
Fl Phase L 0 to 360 deg Fl Phase R 0 to 360 deg
Fl Wet/Dry 0 to 100% Fl Out Bal -100 to 100%