User Guide

FXAlg #715: Dual MovDelay ¥ FXAlg #716: Quad MovDelay
Algorithm Reference-88
PAGE 2
Parameters (Quad MovDelay):
PAGE 1
PAGE 2
PAGE 3
PAGE 4
L
Wet/Dry, R Wet/Dry The relative amount of input signal and effected signal that is to appear in the Þnal effect
output mix for each input channel. When set to 0%, the output is taken only from the
corresponding input (dry) signal. When set to 100%, the output is all wet. Negative
values polarity-invert the wet signal.
L Out Gain, R Out Gain The overall gain or amplitude at the output of the effect for each input channel.
L Delay 0.0 to 1000.0 ms R Delay 0.0 to 1000.0 ms
L LFO Mode Flange, ... R LFO Mode Flange, ...
L LFO Rate 0.00 to 10.00 Hz R LFO Rate 0.00 to 10.00 Hz
L LFO Dpth 0.0 to 200.0% R LFO Dpth 0.0 to 200.0%
L Feedback -100 to 100% R Feedback -100 to 100%
L HF Damp 16 to 25088 Hz R HF Damp 16 to 25088 Hz
L Wet/Dry -100 to 100%wet R Wet/Dry -100 to 100%wet
L Out Gain Off; -79.0 to 24.0 dB R Out Gain Off; -79.0 to 24.0 dB
L1 Mix -100 to 100% R1 Mix -100 to 100%
L2 Mix -100 to 100% R2 Mix -100 to 100%
L1 Pan -100 to 100% R1 Pan -100 to 100%
L2 Pan -100 to 100% R2 Pan -100 to 100%
L Dry Pan -100 to 100% L Dry Pan -100 to 100%
L1/Dry->L2 0 to 100% L1/Dry->L2 0 to 100%
L1 Delay 0.0 to 1000.0 ms L2 Delay 0.0 to 1000.0 ms
L1 LFO Mode Flange, ... L2 LFO Mode Flange, ...
L1 LFO Rate 0.00 to 10.00 Hz L2 LFO Rate 0.00 to 10.00 Hz
L1 LFO Dpth 0.0 to 200.0% L2 LFO Dpth 0.0 to 200.0%
L1 Feedback -100 to 100% L2 Feedback -100 to 100%
L1 HF Damp 16 to 25088 Hz L2 HF Damp 16 to 25088 Hz
R1 Delay 0.0 to 1000.0 ms R2 Delay 0.0 to 1000.0 ms
R1 LFO Mode Flange, ... R2 LFO Mode Flange, ...
R1 LFO Rate 0.00 to 10.00 Hz R2 LFO Rate 0.00 to 10.00 Hz
R1 LFO Dpth 0.0 to 200.0% R2 LFO Dpth 0.0 to 200.0%
R1 Feedback -100 to 100% R2 Feedback -100 to 100%
R1 HF Damp 16 to 25088 Hz R2 HF Damp 16 to 25088 Hz