User Guide

FXAlg #135: Spectral 4-Tap ¥ FXAlg #136: Spectral 6-Tap
Algorithm Reference-46
Each tap also has separate balance and level controls.
Since these are tempo based effects, tap delay values and feedback delay (labeled LoopLength on PARAM2) values
are set relative to a beat. The beat duration is set be adjusting Tempo in BPM. The tempo can be synced to the system
clock by setting Tempo to System.
The ÒbtsÓ parameter is adjustable in increments of 1/24th of a beat, which is a useful fraction because it can divide
beats into 2, 3, 4, 6, 8, or 12 parts. The length of a delay in seconds can be calculated as T = (beats/tempo) * 60.
Parameters (Spectral 4-Tap):
PAGE 1
PAGE 2
PAGE 3
Parameters (Spectral 6-Tap):
PAGE 1
Wet/Dry 0 to 100% Out Gain Off, -79.0 to 24.0 dB
Fdbk Level 0 to 100% Tempo System, 0 to 255 BPM
HF Damping 16 to 25088 Hz Diff Delay 0 to 20.0 ms
LF Damping 16 to 25088 Hz Diff Amt -100 to 100%
LoopLength On or Off Tap2 Delay 0 to 32 bts
Fdbk Image -100 to 100% Tap2 Shapr 0.10 to 6.00 x
Tap1 Delay 0 to 32 bts Tap2 Pitch C-1 to C8
Tap1 Shapr 0.10 to 6.00 x Tap2 PtAmt 0 to 100%
Tap1 Level 0 to 100% Tap2 Level 0 to 100%
Tap1 Bal -100 to 100% Tap2 Bal -100 to 100%
Tap3 Delay 0 to 32 bts Tap4 Delay 0 to 32 bts
Tap3 Shapr 0.10 to 6.00 x Tap4 Shapr 0.10 to 6.00 x
Tap3 Pitch C-1 to C8 Tap4 Pitch C-1 to C8
Tap3 PtAmt 0 to 100% Tap4 PtAmt 0 to 100%
Tap3 Level 0 to 100% Tap4 Level 0 to 100%
Tap3 Bal -100 to 100% Tap4 Bal -100 to 100%
Wet/Dry 0 to 100% Out Gain Off, -79.0 to 24.0 dB
Fdbk Level 0 to 100% Tempo System, 0 to 255 BPM
HF Damping 16 to 25088 Hz Diff Delay 0 to 20.0 ms
LF Damping 16 to 25088 Hz Diff Amt -100 to 100%