User Manual

Program Mode
Save & Delete User Programs
6-18
Save & Delete User Programs
If you make changes to the current Program using any of the controllers, the Save button’s
LED lights to indicate that a change has been made to that Program.
To save the changes you’ve made, press the Save button once. The Save button’s LED begins
to blink and it calls up the Save Dialog.
The display shows the rst available ID number and the current Program name. You can
save Programs with ID numbers from 257 to 512. When you initially press the Save button,
the Artis always selects the next available unused ID number and displays the current
Program name.
In the Save Dialog, there are two parameters available which allow you to specify the ID
number and rename the Program. Use the rst parameter to change the ID number and the
second to rename the Program.
Changing ID Numbers