User Manual
Program Mode
Changing the Transmit MIDI Channel
6-16
Changing the Transmit MIDI Channel
The current MIDI Transmit channel is shown on the right side of the top line of the display.
Press the Param/Channel Up or Down buttons to change the MIDI Transmit channel.
Pressing both Param/ Channel Up and Down at the same time will reset the current MIDI
Transmit channel to 1.
If a MIDI Channel is disabled, the Program name is shown with parenthesis and the
message “Channel disabled” on the line above.
MIDI Channels are enabled/disabled in Global Mode, see Channel Enable (ChanEn) on
page 9-10.