User Manual

Features of the Artis
Master EQ
3-7
Master EQ
The Master EQ allows you to have realtime control over the frequency response of all audio
generated in either Program or Multi Modes. When the Master EQ On/Off button is “On”,
the rotary knobs can change the high , middle & low frequencies of the audio.
If the LED on the Master EQ On/Off button is lit, this indicates that the Master EQ
section is now “on”.
The HI & LOW EQ’s are shelving type lters, and the MID has an adjustable center
frequency with a range of approximately 2 octaves up and down centered around
approximately 1.4 kHz
Frequency Gain
HI
~6.6 kHz -24dB to +15dB
MID*
~1.4 kHz -24dB to +15dB
LOW
98 Hz -24dB to +15dB
* center of range
When the Master EQ is on, the audio signal ows as per the diagram above. When it is off,
the signal ows as per the digram below.