User Manual

Global Mode
LOAD Page
9-16
Selecting Device
If you have chosen Device, the Artis shows a screen listing les on the device.
OPEN
Selecting Open will open a selected folder.
PARENT
Selecting Parent will close an existing open folder.
FILL
Selecting FILL means you would like to keep the existing Programs or
Multis. Artis will now load the User Programs/Multis into the rst empty
ID slot it nds, and then subsequent empty slots.
OVERWRITE
(OVWRTE)
Selecting OVWRTE rst deletes all the existing User Programs or
Multis, and then loads the new User Programs or Multis into the rst
user location at ID number 257 onwards.
Select which method you would like to use. Press Cancel if you would like to abort.
Press OK when the le has loaded.
USB connection errors
If no le is in the Artis temporary drive during the load or an error occurs during the
load operation, then the display will show the error message, “Load Error” and a message
specifying the reason for the error.