User Manual
Multi Edit Mode
COMMON Page
8-23
COMMON Page
In addition to the Zone-specic parameters described above, a Multi has parameters
common to all of its Zones.
Parameter Range Of Values Default Value
AuxFX (List of Effects) none
Aux FX Channel (Channels used in Multi) (Channel of Zone 1)
KB3 Channel 1 to 16 (Channel of Zone 1)
Tempo 20 - 320 120
AuxFX
Use the AuxFX parameter to select a an Aux Effect Chain from the list that can be accessed
by all Programs in the current Multi. Setting this parameter to anything other than “0 None”
uses the selected Chain for the Aux Effect, and the Chain selected by the Aux FX Channel
parameter is disabled. When the AuxFX parameter is set to “0 None”, the Aux Effect Chain
for the Multi is determined by the Aux FX Channel parameter (described below.)
Aux FX Channel
In Program Mode, each Program has its own factory set Aux Effect Chain. Use the AuxFX
Channel parameter to use a Program’s factory set Aux Effect Chain in Multi Mode. All
programs in a Multi share one Aux Effect Chain.
To use a Program’s factory set Aux Effect Chain in Multi Mode, set the Aux FX Channel
parameter to the MIDI channel of the Zone containing that Progam.
If the AuxFX parameter is set to something other than “0 None”, the Chain selected with
Aux FX Channel parameter is disabled. See the AuxFx parameter above for details.