User Manual
Multi Edit Mode
Zone Parameters
8-12
MIDI Page
Parameter Range Of Values Default Value
MIDI Bank 0 to 127 Bank of LocalProgram
MIDI Program 1 to 128 Program Number of Local Program
Entry Program Change Off, On On
Bank Mode None, Ctl0, Ctl32, Ctl0/32, K2600 Ctl0/32
Bend Range Down Prog, 0 to 127 ST 12 ST
Bend Range Up Prog, 0 to 127 ST 2 ST
MIDI Bank
The MIDI Bank parameter determines the MIDI Bank change message that the currently
selected Zone sends when the Multi is loaded. You can set this parameter to a MIDI Bank
change message from 0 to 127.
When using the Artis as a MIDI controller, sending a MIDI Bank change message (along
with a MIDI Program change message) when a Multi is loaded ensures that the Program
loaded on the other sound modules in your MIDI chain is the Program that you want.
For example, if you’ve congured a Multi to work in a specic way with Program 32 in
Bank 5 of a connected sound module, then set MIDI Bank to 5 and MIDI Program to 32.
This way, whenever you load this Multi, the sound module will automatically load Program
32 in Bank 5. Pressing both Previous & Next buttons simultaneously will set this parameter
to the Bank number of the currently selected Local Program.
NOTE : When you change the Program parameter, the MIDI Bank
and MIDI Program parameters will automatically change to match the
Bank and Program numbers of the Program that you select for Local
Program. For example, if you choose Program 178, then MIDI Bank
will change to 1 and MIDI Program will change to 49.