User Manual

Multi Edit Mode
Zone Parameters
8-9
Pressing both Previous & Next buttons simultaneously (Value Jump) will set this parameter
to Local+MIDI.
Status
The Status parameter determines whether the currently selected Zone is active or muted.
You can set this parameter to either of two states: Active or Muted.
Pressing both Previous & Next buttons simultaneously will set this parameter to Active.
Entry Volume
The Entry Volume parameter determines the Volume MIDI message that the currently
selected Zone sends when the Multi is loaded. You can set this parameter to any volume
setting from None, 0 to 127.
Pressing both Previous & Next buttons simultaneously will set this parameter to 127. None
is entered as -1.
Entry Pan
The Entry Pan parameter determines the Pan MIDI message that the currently selected
Zone sends when the Multi is loaded. You can set this parameter to any pan setting from
None, 0 (full left pan) to 127 (full right pan). To pan to center, select 64 for this parameter.
Pressing both Previous & Next buttons simultaneously will set this parameter to 64. None is
entered as -1.
Aux Send Level
The Aux Send Level parameter determines the send level for the auxiliary effects of the
currently selected Zone. You can select any level from Prog, 0 to 127.
Pressing both Previous & Next buttons simultaneously will set this parameter to 10. A value
of Prog uses the default Aux Send Level that the current Zone’s Program uses in Program
mode. To enter a value of Prog, use the Alpha Wheel or Previous/Next buttons to scroll
lower than 0. A value of Prog can also be selected by using the alphanumeric function of the
Program/Multi to enter a value of -1, followed by the Enter button.
For a description of the auxiliary effects of a Multi, see About Auxiliary Effects on page
8-25 and Common Parameters on page 8-23.