User Manual

Storage Mode
The LOAD Page
13-8
You can press the Open soft button to browse within a selected folder, or to browse
individual objects within a selected Kurzweil object le (see the Compatible Files section
below for details).
When browsing individual objects within a Kurzweil object le, you can select one or
multiple individual objects to load. Objects within a Kurzweil le are shown in a list and
grouped by object type. e object that is currently highlighted in red can be selected or
deselected for loading by pressing the “Select” soft button. An asterisk (*) appears next to
selected objects.
After selecting a le or individual objects to load, press the FILL or OVWRTE soft button to
continue.
OPEN
Pressing the Open soft button will open the highlighted folder, or open
the highlighted Kurzweil  le allowing you to select individual objects
PARENT
Selecting Parent will close an existing open folder.
FILL
Selecting FILL means you would like to keep the existing User
Programs or Multis. Forte will now load the User Programs/Multis into
the  rst empty ID slot it  nds, and then subsequent empty slots
.
OVERWRITE
( OVWRTE)
Selecting OVWRTE  rst deletes all the existing User Programs or
Multis, and then loads the new User Programs or Multis into the  rst
user location at ID number 1024 onwards.
During the load process the screen will show information about the objects that are being
loaded. At the end, the screen will display a message indicating if the load process was
successful, or if there were errors.
Example Using LOAD
e following example shows how each dierent loading methods aect how four programs
load into the User bank that already contains programs.
Example: Starting with the following objects already stored in the Forte User bank:
Programs currently in Forte
Program ID Program Name
1024 3rd World Order
1025 PC3 Strings
1028 JuPiTaR BazZ
1031 VA1 Lead
Suppose you were to load a FOR (Forte) le containing the following Programs: