User Manual

Global Mode
MIDI Page
12-13
Parameter Range of Values Default Value
Destination
NONE, LOCAL, MIDI, MIDI+LO-
CAL, USB, USB+LOCAL, US-
B+MIDI, USB+MIDI+LOCAL
USB+MIDI+LOCAL
ChangeMultis Immediate, AllKeysUp Immediate
Bank Select Ctl 0, Ctl 32, Ctl 0/32 Ctl 0/32
PrgChangeMode Extended, K2600 Extended
LocalKbdChan None, 1 to 16 None
SysExID 0 to 127 0
Program Change On, Off On
Destination
e Destination parameter determines the destination of MIDI data generated by striking
keys or activating controllers. is data can be sent to the Forte sound engine, through the
MIDI out ports, or both. You can set this parameter to NONE, or any combination of the
three available destinations.
Note that this parameter is always active and works in conjunction with the Multi Mode
Destination parameter (see page 11-9). ese parameters act like lters, so if the Multi Mode
Destination parameter is set to USB+MIDI+LOCAL and the Global Mode parameter is set
to LOCAL, the MIDI data will only be transmitted locally.