User Manual
Multi Edit Mode
FX Page
11-28
FX Page
e Forte contains Kurzweil’s acclaimed eects processor, and when combined with Multi
Mode it puts the power of an entire studio of audio eects at your ngertips. is section
contains everything you’ll need to know in order to use the Forte’s eects in Multi Mode.
Press the FX soft button to enter the FX page.
FX Page Parameters
Parameter Range Of Values Default Value
Enable Y, N, (Y) Y
AUX1 [p], 0 to 100% [p]
AUX2 [p], 0 to 100% [p]
Aux FX Channel 1 to 16 1
AUX1 Override Yes, No [p]
AUX2 Override Yes, No No
Chain Effects List (Appendix F) No
Mod Override None, Control source None
Output Auto A, B Auto
Enable
Use the Enable parameter to enable or disable the Insert eects Chain of the Program in each
MIDI channel. (e MIDI channel for each Zone can be set on the Zone Main page.) Each
MIDI channel can be set to Y to enable Insert eects, or to N to disable Insert eects. Use
the Alpha Wheel or Value buttons to change between Y and N. Some MIDI channels set to
Y may be displayed as (Y). is means that there are not enough eects resources available
for that channel, and that channel’s Insert eects are not loaded. If you want to use the Insert
eects Chain for a channel displayed as (Y), try setting other channels to N.