User Manual

The Effects Chain Editor
8-1
Chapter 8
The Effects Chain Editor
e Global Mode User Type parameter must be set to Advanced (see User Type) to access the
editing functions described in this chapter.
When in Program Edit Mode on the FX page, pressing the Favorite 1 button while a Chain
(other than 0 None) is highlighted—on any of the various eects pages—will call up the
Chain editor.
You may edit Eects Chains containing up to 16 eects boxes using up to 32 DSP units.
Choose from 18 types of eects boxes, including hundreds of eects box algorithms and
presets. Create custom controller assignments and apply modulation with LFOs, ASRs and
mathematical functions.
From the Program editor, the program’s Insert and Aux Chains can be edited from the FX
and LYRFX pages. In Multi Edit Mode, Chains selected for Aux overrides can be edited from
the AUX1 and AUX2 pages.
A Chain is made up of one or more eect-boxes, with each box containing a single eect.
You can have up to 16 eect-boxes in a Chain. e settings for all of the parameters of
each eect-box are also stored within the Chain. ere are 30 Mod Controls that allow for
real-time control over any parameter from any eect-box in the Chain. Per Chain Control
sources are also provided to be used as inputs to the eect Mods (two FXLFOs, two FXASRs,
and four FXFUNs.) ese work similarly to the LFOs, ASRs and FUNs in Program mode,
but are only available for use with the eect Mods.