User Manual

Program Edit Mode
The PARAMS Page
7-10
The PARAMS Page
PARAMS Page Parameters
Parameter Range Of Values Default Value
Parameter Program / Effect Chain dependent -
Control Physical controller or MIDI CC None
Value None, 0 to 127 None
Press the PARAMS soft button to display the PARAMS page (see above.)
e PARAMS page allows you to access all of the controllable parameters for the current
e Parameters page shows a list of every parameter in the current program that has been
assigned to be controlled by one of the Forte’s physical controllers (or by an external MIDI
CC number). e Parameters page allows you to select a dierent controller assignment, set
an initial MIDI value for each controller assignment, and edit the name displayed for each
controller assignment (names can be edited when Global User Type is set to Advanced). All
VAST, KB3 and FX parameters that have been assigned to a controller or MIDI CC number
are shown. When controller or MIDI assignments are made on other Program or FX Edit
pages, or if an FX Chain is selected which contains controller assignments, these parameters
are automatically added to the Parameters page.
Parameter
e Parameter (left) column shows a list of every VAST parameter in the current program
that has been assigned to be controlled by one of the Forte’s physical controllers (or by an
external MIDI CC number). Eect Chain parameters are named with prexes based on their
eect type, either “INS” for parameters from Insert eects, “LFX” for parameters from layer
eects, or “AUX1/AUX2” for parameters from Aux eects.
Use the navigation buttons to move up and down in the list. To quickly nd a parameter that
is already assigned to a controller, select the parameter column, hold the Enter button and
move a controller to jump to it’s assigned parameter.