User Manual

Global Mode
Selecting and Editing Parameters
9-2
Selecting and Editing Parameters
To scroll through the parameters (and dialogs) of Global Mode, use the Chan / Param
buttons.
Parameter or Dialog Range of Values Default Value
Tuning -100 to 100 Cents 0 Cents
Velocity Map Linear, Light 1, Light 2, Light 3,
Hard 1, Hard 2, Hard 3, Piano
Touch, Easy Touch, GM Receive
Linear
Pressure Map Linear, Easy, Easier, Easiest,
Hard, Harder, Hardest
Linear
FX Select (FXSel) Performance, Multitrack Performance
Channel Enable
(Chan1–16)
Enable, Disable Enable
Destination (Dest) Local, MIDI, Local+MIDI Local+MIDI
Bank Select (BankSel) 0, 32, 0/32 0/32
Program Change
(ProgChg)
On, Off On
Local Keyboard Channel
(LclKbdChan)
None, 1 to 16 None
SysEx ID 0 to 127 0
Hard Reset?
(See corresponding sections below)Save All?
Load All?
To edit the currently selected parameter, use the Alpha Wheel or the Next and Previous
buttons below the display. Pressing both Value buttons simultaneously will jump to a
different value depending on the parameter—the jump value is mentioned in each of the
parameter descriptions below. Additionally, you can use the secondary alphanumeric
functions of the Category buttons: Note that on each button the secondary function is
printed in white ink.