User Manual

Edit Setup Mode
The Zone-specic Parameters
8-12
Continuous Controller Parameters
• Pressure
• Mod Wheel
• Sliders 1 through 15
• CC Pedal
Destination
The Destination parameter determines the Controller Destination for the currently selected
controller in the currently selected Zone. You can select from the following destinations:
Controller
Number
Controller
Destination
Description
0 OFF/Bank By default, when you enter 0 or Clear for the Destination parameter, the
destination will be assigned to OFF. To select Bank as the destination, use
the Value buttons.
1 MWheel Default destination for Mod Wheel
2 Breath Default assignment for breath controller in compatible synths
3 MIDI 03 MIDI Controller 3
4 Foot Default assignment for continuous foot controller in compatible synths
5 PortTim Monophonic SP5 Programs respond to this Controller if portamento is
turned on.
6 Data Almost all SP5 Programs have this Controller assigned to lter frequency
or brightness.
7 Volume MIDI Volume
8 Balance MIDI Balance
9 MIDI 09 MIDI Controller 9
10 Pan MIDI Pan
11 Express Default assignment for CC Pedal. In most Programs it acts as a volume
control. It scales between 0 and the current value of Volume.
12 MIDI 12 MIDI Controller 12
13 MIDI 13
14 MIDI 14 Default destination for Slider 1
15 MIDI 15 Default destination for Slider 2
16 MIDI 16 Default destination for Slider 3
17 MIDI 17 Default destination for Slider 4
18 MIDI 18 Default destination for Slider 5
19 MIDI 19 Default destination for Slider 6
20 MIDI 20 Default destination for Slider 7
21 MIDI 21 Default destination for Slider 8
22 MIDI 22 Default destination for Slider 9
23 MIDI 23 Default destination for Slider 10
24 MIDI 24 Default destination for Slider 11
25 MIDI 25 Default destination for Slider 12
26 MIDI 26 Default destination for Slider 13
27 MIDI 27 Default destination for Slider 14
28 MIDI 28 Default destination for Slider 15