User Manual
Terminology
4-1
Chapter 4
Terminology
This chapter provides denitions and descriptions for all of the SP5-specic terms used
in this manual. Note that some of the terms are also used by other manufacturers. Since
there are no standard denitions for some of these terms, they are described here to avoid
confusion. All of these terms appear capitalized as proper nouns in this manual to make it
easy to distinguish between the generic term and the SP5-specic term.
Object Anything that can be named, saved, deleted, or
edited (i.e., a Program or a Setup). See Program Mode
on page 6-1 and Setup Mode on page 7-1 for more
information on Objects.
Program A factory-preset or user-programmed sound
stored in ROM or ash memory. Each Program
has parameters assigned to most of the controllers
(sliders, Sw button, Mod Wheel, and pedals). Not
all controllers have a parameter assigned in every
Program. See Program Mode on page 6-1 for more
information on Programs.
Setup A factory-preset or user-programmed MIDI
performance preset consisting of four Zones, each
with its own keyboard region, Program, MIDI
channel, and controller assignments. See Setup Mode
on page 7-1 for more information on Setups.
Zone A keyboard region of a Setup that has its own
Program, MIDI channel, and controller assignments.
See Setup Mode on page 7-1 for more information on
Zones.
Split A division of Zones in a Setup. See The Split Function
on page 5-4 for more information on Splits.