User Manual

Features of the SP5
Double Button Presses
3-9
Double Button Presses
Several pairs of the buttons on the SP5 have timesaving secondary functions when pressed
simultaneously—think of them as keyboard shortcuts. For convenience of reference,
descriptions of all of the double-button press functions appear below.
Value Jump
Depending on the current Mode or operation, pressing both the Next and Previous Value
buttons simultaneously selects the following:
In Program Mode, pressing the Value Jump buttons selects the rst Program of next
Category or the default Program, if any, of the current Category. The destination of the rst
jump depends on where you are in the current Category.
For example, if the current Program is the rst Program of a Category, pressing the Value
Jump buttons selects the default (favorite) Program of that Category. If the default is
the same as the rst (no favorite saved), pressing the Value Jump buttons selects the rst
Program of the next Category. Pressing the Value Jump buttons yet again selects the default
Program for that Category, if any, or the rst Program of the next Category, etc. This
continues each time you press the Value Jump buttons. For more information on choosing a
new default Program, see Choosing Favorites on page 6-5.
In Setup Mode, pressing the Value Jump buttons jumps the current Setup to the next Setup
in intervals of eight (Value Jump = current Setup + eight).
In Edit Setup Mode, pressing the Value Jump buttons resets the current parameter to its the
default value.
Prog Xpose:0 Ch:1
1 Pro Pi ano
Param Jump
Buttons
Value Jump
Buttons