User Manual

Introduction
Staying Current
1-2
• a pitch wheel
• a modulation wheel
• ve assignable sliders (use the Shift button to select three different functions for
each slider to control up to 15 parameters of your choosing).
• on the rear panel, three jacks for optional pedal controllers: two for switch pedals
and a third for a continuous controller pedal–Pedal 1(Sustain), Pedal 2 and CC Pedal.
Pedals (Optional)
As described above, the SP5 has three jacks on the rear panel for optional pedal controllers.
Two jacks for switch pedals, which are typically used to control two-state (i.e., on / off)
parameters such as sustain, sostenuto, and mute Zone. The third jack is for a continuous
control (or CC) pedal typically used to control multi-state (i.e., “continuous”) parameters
such as lter frequency or LFO amount.
Note that switch pedals can be used to control continuous parameters just as continuous
control pedals can be used to control two-state parameters.
Your Kurzweil dealer stocks the following pedals:
• FS-1 Standard box-shaped switch pedal
• KFP-1 Single piano-style switch pedal
• KFP-2S Double piano-style switch pedal unit (one stereo plug)
• CC-1 Continuous pedal
Staying Current
Be sure to check the Kurzweil Music Systems website at www.kurzweil.com for new
documentation and software updates before using your new instrument.
Do You Have Everything?
Your SP5 package should contain the following in addition to your instrument:
• Power cable and 15V power adapter
• Switch pedal
• USB cable (Type-A-to-Type-B)
• Musician’s Guide (this book)
If you don’t have all of these components, please to contact your Kurzweil / Young Chang
dealer.