Manual
26
duplication, processing or translation in any form (including excerpts) are only
permissible after obtaining written permission from Gossen Metrawatt GmbH.
This applies in particular to storage and processing in electronic systems.
Scope of Delivery
KE301: ET300, P310, protective bag, manual
KE401: ET400, P410, protective bag, manual
KE501: ET500, P510, 2 × plug-on extra strong alligator clips,
2 × plug-on test tips, protective bag, manual
KE701: ET720, P410, 2 × plug-on alligator clips, protective bag,
manual
KE702 (Telekom):
ET720, P410,
2 × plug-on alligator clips,
protective bag,
2 × 9 V battery, adapter RJ-11 socket (6P6C) to TAE,
manual
KE801: ET800, P410, protective bag, manual
KE801 (Telekom):
ET800, P410, protective bag, 2 × 9 V battery,
adapter RJ-11 socket (6P6C) to TAE,
manual
ET300/ET400/ET500/ET720/ET800: device, manual
P310/P410/P510: device, manual
Please check for completeness and integrity.
Note: Per device, a 9 V battery is required to operate it which is not included
in delivery (exceptions: KE702 (Telekom), KE801 (Telekom)).
Optional Accessories
Some applications require optional accessories. Detailed information can be
found in the data sheet; this documentation only mentions the accessory and
describes it application.
Device Overview
For technical data please refer to chapter „Spezikationen/Specications“
auf Seite 39.
Receiver: P310/P410/P510
The Probe is a contact-free test speaker that receives the sig-
nals sent by the ET and makes them audible. The green signal
strength LED indicates the precise 1 kHz signal from the ET. Interfer-
ingsignals,e.g.50Hzortheharmonicsthereof,arelteredout.
The P410 has an additional red LED, with which an ISDN UK0 line can be