Product Manual

OPERATIONS AND ADJUSTMENTS
This safety alert symbol is used to indicate safety instructions. Follow
ese instructions to avoid personal injury and/or property damage.
yone to operate this equipment who has not fully read and
comprehended the safety manual and who has not been properly trained in the safe
unit.
ARNING: Do not store extra coulters or sweeps in an upside down position in the shank
AUTION: Lower implement, stop engine, set brake and remove key before servicing,
before making repairs.
CAUTION: Do not stand or climb on equipment.
A.
d with a leveling device to adjust for different hitch heights as well as to make
e tool level. When adjusted properly, the tool will stay relatively level throughout the height
adj
ote: When leveled, the tool will operate more efficiently in the ground. An unleveled tool can
.
e top link counter-clockwise will raise the rear end of the tool and
clock-wise will lower the rear end of the tool. After adjustments are made, lock the top link in
Note: Depending on ground conditions, slight adjustments may need to be made after the tool
ground at the desired depth.
5
th
Read and follow all instructions in this manual.
WARNING: Do not allow an
operation of the equipment.
WARNING: Operator should be familiar with all functions of the
WARNING: Keep bystander clear while operating equipment.
CAUTION: Only operate the tillage tool’s electric lift while seated on tow vehicle.
W
receivers.
WARNING: Do not allow riders.
C
adjusting, repairing or unplugging.
CAUTION: Safely support and secure implement
LEVELING THE TOOL
This tool is equippe
th
ustment range.
N
result in improper coulter or sweep function.
1. Remove the hitch pin from the tongue and attach the tongue to the hitch on the tow vehicle
2. This leveling can be done by adjusting the top link. Unlock the locking tab on the top link.
Turning the handle on th
place. (See Figure 2.)
is placed in the