User's Manual
Table Of Contents
- 1. Legal Notices
- 2. Warranty
- 3. Security Summary
- 4. revision history
- 5. INTRODUCTION
- 6. Illustration of Fixture Parts
- 7. Safety Regulations
- 8. Fixture operating environment requirements
- 9. Operation Procedures
- 10. Software interface and error codes
- 11. maintenance
- 12. Consumable part list
- 13. SPARE part list
- 14. fixtures Dismantling and scrapping
KUNSHAN MYZY FIXTURE TECHNOLOGY CO.,LTD
STORAGE
When the tester is no longer in use, please pack it properly and store it in a good environment.!
FREIGHT
Use the original packaging material when moving this test fixture over long distances. If there is
a lack of packaging material, please use the equivalent cushioning material for packaging and
mark it fragile and waterproof, etc., so as not to damage the test fixture during transportation.!
The test fixture is a kind of precision equipment. please use qualified means of transportation as
far as possible and avoid damage to the equipment such as external forces.!
MAINTENANCE
This is a manual for the average user that does not need to be maintained (in addition to the
instructions in the manual). When the test fixture is abnormal by user judgment, please contact
the after-sales maintenance department of the company. Do not maintain without permission,
avoid unnecessary danger and serious damage to the test kit.!
CLEANING
Turn off the power before cleaning. Gently clean the dust with a brush. !
For internal cleaning, please use a low-pressure vacuum cleaner to absorb the dust inside.!
1
Indoor Temperature 23℃±3 ℃
2
Indoor Humidity 45%~60%
3
Places that do not receive direct sunlight
4
Keep away from water and oil stains
5
Keep away from areas containing volatile components or corrosive gases
6
Store in a dust-free place as much as possible.
7
Avoid subjecting the fixture to vibration shocks above 0.5G.
8
Avoid exposing the fixture to electromagnetic waves, ultraviolet light, and radiation.
/7 31