User's Manual
Table Of Contents
- 1. Legal Notices
- 2. Warranty
- 3. Security Summary
- 4. revision history
- 5. INTRODUCTION
- 6. Illustration of Fixture Parts
- 7. Safety Regulations
- 8. Fixture operating environment requirements
- 9. Operation Procedures
- 10. Software interface and error codes
- 11. maintenance
- 12. Consumable part list
- 13. SPARE part list
- 14. fixtures Dismantling and scrapping
KUNSHAN MYZY FIXTURE TECHNOLOGY CO.,LTD
11. MAINTENANCE
Note: Turn off the power before perform maintenance and do not operate until the heating
bar temperature drops below 35°C.
PURPOSE
The test fixture is performed by a precise mechanical movement, which must be regularly
maintained in order to guarantee the normal use of the fixture.
Items
Method
Daily
Monthly
Clean the hot pocket and HP Track before
power on.
Lint-free cloths
√
Ensure the emergency stop switch is
functioning well.
Press E-stop in the fixture running state to
see if the motion components will stop.
√
Check whether the motion components
are loose
Visual inspection and wrench
√
Check whether the NB/HP module cables
are loose.
Visual inspection and wrench
√
/29 31