Data Sheet

RevPi Flat
Article No.: 100330
Housing dimensions (H x W x D) 90 x 106 x 70 mm
Housing type DIN rail housing (for DIN rail version EN 50022)
Housing material Polycarbonate
Weight approx. 248 g
IP Code IP20
Power supply typ. 24 V DC (12.0 … 28.8 V DC), reverse polarity protected
Max. power consumption 16 W (incl. max. 5 W USB)
Operating temperature -20 °C .... +55 °C
Storage temperature -40 °C .... +85 °C
Humidity (at 40 °C) 93 % (non-condensing)
Interfaces
4 x RJ45 10/100 Ethernet , two separate MAC addresses for LAN0 & LAN1 ->
LAN0: 1 x Ethernet, LAN1: 3 x Ethernet switched,
2 x USB A (total current draw from all sockets max. 1 A) ,
2 x RS485 max. 500 kbps, galvanically isolated, termination switchable by software,
1 x RP-SMA jack WLAN,
1 x SMA jack ISM 868 MHz
Connectors 2-, 3- and 5-pole screw-type terminal
Processor Broadcom BCM2837B0 quad-core ARM Cortex A53
Clock rate 1.2 GHz
Processor cooling Passive with heat sink
RAM 1 GB
Flash memory 8 GB
Number of digital output channels 1
Digital output type potential-free relay contact
Maximum current output channel 2 A @ 30 V DC
Number of analog input channels 1
Analog input type 0-10 V DC or 0-20 mA, single ended, 16-bit at piControl, 21-bit raw value
Number of analog output channels 1
Analog output type
0-10 V DC, short-circuit proof, protection against backfeeding,
12-bit resolution, 1% accuracy
Maximum current load of the analog output 10 mA (10 V DC @ 1 k)
Software interface of inputs and outputs Via GPIOs and process image
EMC interference emission according to EN 61000-6-4
EMC immunity according to EN 61000-6-2
Buer time RTC min. 24 h
Optical indicator 6 status LEDs (bi-color), ve of them freely programmable
RoHS conformity Yes
CE conformity Yes
Technical Data
Version: 1.0
page 1/1Errors excepted and possible alterations without prior notice.
KUNBUS GmbH, Heerweg 15C, 73770 Denkendorf, Germany | Tel: [phone] | Fax: [phone] | Email: [e-mail] | Web: www.kunbus.com