Datasheet

RevPi Core
Article no.: 100102
Housing dimensions (HxWxD) 96 x 22.5 x 110.5 mm
Housing type DIN rail housing (for DIN rail version EN 50022)
Housing material Polycarbonate
Weight approx. 108 g
Protection class IP20
Power supply 12-24 VDC -15 % / +20 %, reverse polarity protected
1
Max. power consumption 10 W (incl. 900 mA total USB load)
2
Operating temperature -40 °C to +55 °C
3
Storage temperature -40 °C to +85 °C
Humidity (40 °C) Up to 93 % (non-condensing)
Interfaces
2 x USB A (Total current consumption from both sockets max. 900 mA)
2
1 x RJ45 10/100 Ethernet
1 x Micro-USB (solely for image transfer to eMMC)
1 x Micro HDMI
2 x PiBridge system bus
Connectors 1 x 4-pole screw-type terminal for power supply
Processor Broadcom BCM2835 single-core ARM11
Clock rate 700 MHz
Processor cooling -
RAM 512 MB
Flash memory 4 GB
Compatible modules for system expansion
All RevPi IO modules and RevPi Gate modules can be connected via the
PiBridge system bus
ESD protection 4 kV / 8 kV (according to EN 61131-2 and IEC 61000-6-2)
EMI tests Passed (according to EN 61131-2 and IEC 61000-6-2)
Surge / Burst tests Passed (according to EN 61131-2 and IEC 61000-6-2)
Buer time RTC min. 24 h
Optical indicator 3 status LEDs (bi-color), two of them freely programmable
Conformity RoHS
Markings and certications CE, UL
Technical Data
3
Not having heavy USB loads and providing a free heat emission of the housing we have operated RevPi Core up to 65 °C at 24 V input supply voltage without any problems. We can’t guarantee
cold start of a cooled down system at ambient temperatures less than -30 °C using 24 V power supply voltage.
Version: 1.5
Page 2/2Errors excepted and possible alterations without prior notice.
KUNBUS GmbH, Heerweg 15C, 73770 Denkendorf, Germany | Tel: [phone] | Fax: [phone] | Email: [e-mail] | Web: www.kunbus.com
2
The average power consumption without USB loads vary widely and depends on the specic use of interfaces, GPU and CPU. Not using the HDMI interface keeps the power consumption of
generally below 4 W.
1
900 mA USB output current (sum of both USB outputs) is only available at input voltages >11 V. The bridging time required by EN 61131-2 of voltage dips of at least 10 ms is only guaranteed
with a supply voltage of 20.4 to 28.8 V. At 12 V input voltage this time decreases drastically, especially when driving loads by USB ports.