Data Sheet
RevPi Core
Article No.: 1000102
Housing dimensions (H x W x D) 96 x 22.5 x 110.5 mm
Housing type DIN rail housing (for DIN rail version EN 50022)
Housing material Polycarbonate
Weight approx. 108 g
Protection class IP20
Power supply min. 10.7 V - max. 28.8 V
4
Max. power consumption 10 Watt (incl. 2 x 450 mA USB load)
5
Operating temperature -40 °C to +55 °C
(exceeds EN 61131-2 requirements)
6
Storage temperature -40 °C to +85 °C (exceeds EN 61131-2 requirements)
Humidity (40°C) up to 93% (non-condensing)
Interfaces
2 x USB 2.0 A (each can be charged with 500mA) | 1 x Micro-USB |
1 x Micro HDMI | 1 x RJ45 (Ethernet) 10/100 Mbit/s
Processor BCM2835, 700 MHz, single-core
RAM 500 MByte
Flash 4 GByte
Polarity protection Yes
ESD protection
4 kV / 8 kV (according to EN 61131-2 and IEC 61000-6-2)
EMI tests Passed (according to EN 61131-2 and IEC 61000-6-2)
Surge/Burst tests
Passed (according to EN 61131-2 and IEC 61000-6-2 using
power supply , Ethernet line und IO lines)
Buer time RTC min. 24 h
Optical indicator Three status LEDs (bi-color), two of them freely programmable
4
RevPi Core can only drive 2 x 500 mA USB 5 V supply using input voltages greater than 11 V. EN 61131 demands a minimum of 10 ms tolerance against power failure which can only be
guaranteed with input voltages form 20.4 V to 28.8 V. At 12 V input voltage this time decreases drastically, especially when driving loads by USB ports.
5
The average power consumption without USB loads vary widely and depends on the specic use of interfaces, GPU and CPU. Not using the HDMI interface keeps the power consumption of
RevPi Core generally below 4 Watt.
Technical Data
6
Not having heavy USB loads and providing a free heat emission of the housing we have operated RevPi Core up to 65 °C at 24 V input supply voltage without any problems. We can’t guarantee
cold start of a cooled down system at ambient temperatures less than -30 °C using 24 V power supply voltage.
Version: EN 1.3
page 2/2Errors excepted and possible alterations without prior notice.
KUNBUS GmbH, Heerweg 15C, 73770 Denkendorf, Germany | Tel: +49 (0)711 300 20 678 | Fax: +49 (0)711 300 20 677 | Email: info@kunbus.com | Web: www.kunbus.com