Instructions

Systems with PROFIBUS Master Option
60 © KUNBUS
7.3.2.10 Show Slave diagnostic
In case the diagnostic data of the edited Slave changes, the
NetTEST II signals this through a '!' followed by the message
"DATA EXCHANGE" in the last line.
This option reads out the diagnostic data and displays them in a
decoded mode as far as possible. Due to the fact, that the
SLAVE_DIAG_REQ Service was performed, the Slave resets
this flag until the new diagnostic data occur.
7.3.3 Single DP services
By selecting Single DP services single PROFIBUS services for
the currently selected Slave can be performed.
The following PROFIBUS services are integrated in the
NetTEST II:
 SET_PRM_REQ
 CHK_CFG_REQ
 SLAVE_DIAG_REQ
 DATA_EXCHG_REQ
 GET_CFG_REQ
 SET_SLAVE_ADDRESS_REQ
 GLOBAL_CONTROL_REQ
 RD_OUTP_REQ
 RD_INP_REQ
Figure 53: Screen ‘Single DP services’