Instructions

Systems with PROFIBUS Master Option

7.3.2.5 Edit cfg. data

Here, the user can view / modify the configuration data for the

CHK_CFG_REQ service. Modification of these parameters

functions in the same way as described in chapter 7.2.5.1.

7.3.2.6 Edit xchg. data

Here, the output-data for the Slave can be entered. Changing

these values functions in the same way as described in chapter

7.2.5.1.3.

7.3.2.7 Show xchg. data

Input data received by the Slave are displayed here. (The data

packets sent cyclically from Slave to Master). These values

may not be changed.

7.3.2.8 Edit DPTag output

This option opens a submenu, out of which the user may select

one of the defined output tags. Thereafter, he has the option of

entering data corresponding to the type of the tag.



This is above all very helpful when sending float

values to the Slave.

7.3.2.9 Show DPTag input

This option opens a selection menu, where the user may select

one of the defined input tags. Thereafter, the data

corresponding to the type of the tag are displayed.