Instructions

Systems with PROFIBUS Master Option
58 © KUNBUS
7.3.2.1 Line-up
The user herewith has the opportunity to constantly modify
Slave configuration data in the case of uncertainty about the
right configuration.
Moreover, if the Slave has reached the "Data-Exchange" status,
the user can modify output data (to the Slave) or, display and
evaluate input data (from the Slave).
Figure 52: Screen ‘Line up’
7.3.2.2 Edit slave address
With this option the user can modify the PROFIBUS address of
the Slave. Address selection takes place over the address menu
(see chapter 7.2.5.1).
7.3.2.3 Edit slave parameters
The user can view / modify several more important parameters.
Modification of these parameters functions in the same way as
described in chapter 7.2.5.1.
7.3.2.4 Edit prm. data
Here, the user can view / modify the user-specific parameters.
Modification of these parameters functions in the same way as
described in chapter 7.2.5.1.