Instructions

Systems with PROFIBUS Master Option
54 © KUNBUS
7.2.5.2 Copy Slave
This option enables the user to generate a 1:1 copy of an
existing Slave configuration. All related tag definitions are
included in the copy (see chapter 7.3.1.5 DPTag definitions).
In the first step, the user has to select from the list of existing
Slaves the one that is to be duplicated.
Figure 49: Selection menu ‘Copy slave’
Upon selection of one of the listed Slaves, the user has to
choose a new PROFIBUS address for the copy. (Each
subscriber at the bus segment has to possess his own individual
address).
The address selection takes place by means of the address
selection menu. (see chapter 7.2.5.1).
Further entries are not necessary for generating a Slave copy.
7.2.5.3 Delete Slave
Selection of a Slave to be deleted takes place analogously to
the selection of the Slave to be copied in chapter 7.2.5.2.
Deletion has to be reconfirmed by pressing the key.
7.2.5.4 Process Slave
"Process Slave" signifies the configuration of Slave-related
parameters, editing / modifying / deleting of tag definitions of
the Slave operation, as well as activating the Slave through
PROFIBUS single services. Details of this option are described
in detail in chapter 7.3.