Instructions

Systems with PROFIBUS Master Option
48 © KUNBUS
 Select the PROFIBUS address, baud rate and slot time in
the "NetTEST Master" dialogue.
 Select a new Slave over the context menu of the
"NetTEST Master". The context menu of the "NetTEST
Master" can be accessed by pressing the right mouse
button, after selecting the "NetTEST Master" element of
the tree-like structure.
 Select the GSD of the Slave that is to be newly created
from the file dialogue. The Slave Configuration menu
subsequently displayed enables the user to configure the
bus subscriber (if supported by the GSD file) parameter
data, module definitions, as well as module parameters.
Details to the Slave configuration may be found in the
Configurator Online-Documentation.
Figure 40: Slave-Configuration Dialogue
 Multiple Slave definitions may be created by repeating the
last steps several times over.
 Choose the option "New tag(s)" on the context-sensitive
menu of the newly generated slave. This menu may be
opened by pressing the right mouse button, provided that
the slave is selected from the tree-like structure.