Instructions

Systems with PROFIBUS Master Option
© KUNBUS 43
7.1.1 Set outputs
The output data of the Slave can be modified as described in
chapter 7.2.5.1.3.
7.1.2 Read inputs
The input data received from the Slave are displayed.
Modifying of this data is not possible.
7.1.3 Set value
Output values are an extraction from the output data stream of
the Slave. With output values it is possible to access for
example a digital output or an analogous real value directly.
Output values are defined via tags in the DP Master-
configuration.

This can be very helpful especially if REAL values are
processed with the Slave
7.1.4 Read value
Input values are an extraction from the input data stream of the
Slave. With input values it is possible to examine for example a
digital input or a analogous real value directly. Input values are
defined via tags in the DP Masterconfiguration.
7.1.5 Read diagnostics
Reads the diagnostic data of the Slave and shows a decoded
representation.
Not read diagnostic data are shown by an additionally “!“ in
the status message of the Slave, e.g. “in operation!”. With
reading the diagnostic data the “!” is deleted from the status
message.