Instructions

Communication with a PC
© KUNBUS 39
6.5 Send file from NetTEST II to the PC
In order to, e.g. save parameter sets, data must be able to be
sent from the NetTEST II to the PC. In this case, proceed as
follows:
 Connect NetTEST II via the serial connection line
(included in delivery) to the COM interface set in the
terminal application.
 Start the previously configured terminal application on
your PC.
 Click on Transmission - File receive... in the terminal
application.
 Enter the directory over the subsequent browser, where the
file to be received is to be saved. Set the transmission
protocol to Kermit.
 Start the transmission receive in the PC (e.g. Receive
button in the Hyper Terminal Dialogue).
Start the receive command in the corresponding menu in the
NetTEST II.