Instructions

Communication with a PC
© KUNBUS 37
6.3 Receive Test Protocol
To receive a test protocol from NetTEST II please proceed as
follows:
 Connect NetTEST II via the cable connector, included in
the delivery, with the COM interface defined in the
terminal program.
 Start the configured terminal program on your PC.
 In your terminal program, click on Transfer-Capture-Text
 In the browser opening now enter the directory where you
wish to save the test file. Also, indicate the file name for
the test protocol. Now click on Start.
 Start the transmission from NetTEST II to the PC (see
chapter 5.2.2.4).
 When the transmission is finished, the terminal program
must be closed with Transfer–Capture Text–Stop.